Energy Systems at IgMin Research | Engineering Group

This paper presents a Technical and Economic Feasibility Study of proposed Pumped Storage Power Plants (PSPPs) at KM (Kuda Oya, Mul Oya), KMG (Kuda Oya, Mul Oya, Gurugal Oya), KG (Kuda Oya, Gurugal Oya), and Dambagasthalawa. Sri Lanka aims to transition away from a coal-dominant electricity sector within the next decade, aligning with sustainability goals outlined by the United Nations. In pursuit of affordable and clean energy sustainability, the Sri Lankan government has opted to shift its long-term energy policy towards renewable sources, de...parting from fossil fuels. Despite this shift, a significant portion of Sri Lanka's electricity consumption—approximately 600 MW from oil and 900 MW from coal—persists. The country now aims to source 80% of its energy from renewable sources, necessitating a focus on underutilized opportunities. In selecting the best candidate sites for Pumped Storage Power Plant (PSPP) design, comprehensive hydrological and sedimentation studies play a pivotal role. In this endeavor, we endeavor to re-rank the selected candidate sites for pumped storage power plants considering technical & financial feasibility by conducting comprehensive hydrological and sedimentation studies. These studies are pivotal for assessing the feasibility and long-term viability of potential sites, aiming to select the most sustainable candidate site in every aspect. Therefore, the primary objective of this research is to conduct a thorough hydrologic study of the proposed KMG and Dambagastalawa pump storage power plants, focusing on identifying potential energy-saving opportunities in pumping when these plants operate as open-loop systems. This study will analyze the hydrology of the upper ponds of the Kuda Oya, Mul Oya, and Gurugal Oya (KMG) pump storage power plants, and the Dambagastalawa Oya pump storage power plant, assessing the potential reduction in pumping energy. Such insights are essential for optimizing the design and operation of PSPPs to ensure economic viability and sustainable energy generation. Furthermore, this research addresses the importance of studying sedimentation in both the upper and lower ponds of the KMG and Dambagastalawa pump storage power plants. Sedimentation calculations will be performed to determine reservoir lifetimes, offering critical insights into the long-term feasibility and maintenance requirements of these projects. The findings of this study are expected to provide valuable guidance to policymakers, investors, and PSPP designers in selecting the most suitable sites for addressing Sri Lanka's peak power demands and urgent electricity needs. By emphasizing the significance of hydrological and sedimentation studies, this research underscores the importance of thorough site assessment in optimizing the design and operation of Pumped Storage Power Plants. Read more

The types and concentrations of gas hydrates collected from four different geological sites were analyzed using high-resolution angular dispersive X-ray powder diffraction, with synchrotron radiation as the source. Measurements were taken across a temperature range of 80 to 300 K and a pressure range of 0.1 to 80 MPa. All four gas hydrate samples showed the presence of three mixed crystal structures: structures I, II, and H. Additionally, the ice Ih structure was inherently present in all the natural gas hydrate minerals. The variation in the t...ypes and concentrations of gas hydrates can be attributed to the diversity of natural gases at different geographic locations.Read more

This paper presents an in-depth Life Cycle Assessment (LCA) of the Lukala Cement Plant, highlighting the environmental impacts associated with cement production. The cement industry, as one of the largest emitters of CO2, raises major sustainability concerns, particularly due to the deleterious effects on climate and public health. The objectives of this research include not only assessing greenhouse gas emissions but also identifying concrete methods to reduce these impacts. The study reveals that the Lukala Cement Plant emits approximately 57...9,130 tons of CO₂ per year, mainly from the decarbonation of limestone (67%) and the clinkerization process (33%). These figures far exceed regulatory thresholds, highlighting the urgency of rapid and effective intervention to mitigate these emissions. The LCA identified the most polluting production steps, including extraction, grinding, and clinkerization, paving the way for targeted and strategic improvements. Opportunities for optimization were identified, including the use of less pure limestone, the integration of recycled materials, and the transition to renewable energy sources for the clinkerization process. This research is crucial in the current context of the fight against climate change. As a major contributor to greenhouse gas emissions, the cement industry must imperatively adopt sustainable practices. LCA provides a robust methodology to quantify environmental impacts and identify appropriate solutions. The results of this study can be applied to other cement plants around the world, serving as a model for other carbon-intensive industries. Future research should explore the integration of innovative technologies, such as carbon capture and storage, and the use of alternative materials in cement production. This study highlights the importance of immediate and coordinated action to transform the cement industry into a sustainable sector, ensuring economic profitability while protecting the environment for future generations. Commitment to environmentally responsible production practices is not only desirable but also essential to ensuring a sustainable future.Read more

In recent years, manufacturing enterprises have faced overall ϐinancial stress due to market conditions and new forms of positive development. Excessive inter-company loans have led to the rupture of the capital chain among enterprises, resulting in developmental challenges. Studying the ϐlow of funds between enterprises, it is observed that ϐinancial risks bear similarities to the spread of infectious diseases like SARS. This paper employs the MATLAB data analysis environment, Python data analysis tools, and the SEIRS dynamic time-varying e...pidemiological model to investigate systemic risk transmission among enterprises. The analysis reveals that high-risk transmission rates, low-risk immunity rates, and low-risk isolation rates contribute to the rapid and uncontrollable spread of systemic risks among enterprises. Consequently, recommendations are made to strengthen market supervision, government intervention, and national regulation to ensure the safety of manufacturing enterprises.Read more

The study focuses on investigating the behavior of Electric Power Systems (EPS) during desynchronization from a synchronous area, its stability in island mode operation, and its synchronization with Continental Europe (CE). The primary aim is to ensure and maintain the stability and reliable operation of self–operating individual EPSs by analyzing the technical requirements and prequalification procedures for Frequency Containment Reserves (FCR) and Load Frequency Control (LFC) reserves.The study employed numerical simulations to analyze ...the behavior of isolated EPSs after losing a certain amount of active power, to ensure reliable operation and avoid the effects of Under Frequency Load Shedding (UFLS). It examined the technical requirements for LFC reserve units, such as the ability to remain connected to the network during disturbances and provide necessary support. The research investigated the procedures for prequalifying reserve units to provide FCR and LFC services.This investigation contributes to ensuring that EPSs operate reliably during desynchronization and that reserve providers meet the necessary technical and operational standards.Read more

Exchangers are thoroughly used equipment for heat transfer. These equipment play a climacteric role in variegated business administration and buildings by providing heat exchange between two fluids. However, over time, exchangers can be subject to variegated problems such as contamination and sediment build-up. This can diminish heat transfer efficiency, leading to energy waste and equipment malfunctions. Calcification is a problem that comes off when water becomes saturated with hard minerals and exceeds the solubility of these minerals. These... minerals precipitate as a consequence of water evaporation or chemical reactions and form a solid layer called limestone. Limescale can bring variegated problems in homes, business administration, and water transportation systems. Lime accumulates on heat transfer superficies, reducing the superficies area of ​​these superficies. This reduces the superficies area available for heat transfer and inhibits heat transfer. The thermal conductivity of lime is lower than water. Scale, which is the formation of a scale layer on heat transfer superficies, reduces the thermal conductivity of these superficies and prevents heat transfer. This study focuses on the types of contamination in heat exchangers, the effect of contamination on heat transfer and other factors, and methods of clogging.Read more

Over the past decades, interest in renewable energy has grown, this is due to the aggravation of climate change. The emerging trend of decarbonization of the world economy, including transport and energy, which are one of the main sources of air pollution with carbon dioxide emissions. The article discusses issues of climate change, decarbonization scenario, a road map for “greening” the economy, and presents a brief analysis of trends in the development of hydrogen energy and the importance of the development of “green”... hydrogen in the world and in Turkmenistan. The main attention is paid to the prospects and scale of development of hydrogen energy to a certain extent will depend on the characteristics of the hydrogen sources proposed for use ­, primary energy sources and hydrogen production technologies, environmental consequences when using different approaches to hydrogen production, expected costs for hydrogen production, potential consumers and volumes of hydrogen consumption within the country and abroad, technologies for storing and delivering hydrogen to consumers, the competitiveness of hydrogen as an energy carrier in the domestic and foreign markets, taking into account all the necessary costs and a potential “transboundary carbon ­tax”.Read more

Many countries have used various strategies in the effort toward transition to alternative energy as a solution in developing renewable energy. Indonesia is the second largest producer of geothermal energy in the world. The potential of Indonesia lies in the Ring of Fire along with 117 active volcanoes, giving Indonesia high geothermal potential. This research aims to reveal and formulate the potential of geothermal as renewable energy in Indonesia as an alternative energy to be used in the future. The methods in this research are qualitative a...nd quantitative. Through the quantitative method, this research will present secondary data from various organizations as well as data from prior research on geothermal potential in the world. While qualitative method will formulate ideas of several geothermal usages from many countries by using comparison from prior research and literature from journals, books, and other publication sources. Qualitative research results will also come from in-depth interviews with stakeholders that have implemented geothermal energy in Indonesia. The result of this research will illustrate the importance of geothermal energy as an alternative renewable energy in Indonesia to replace crude oil resources as the main natural resource in Indonesia. This research recommends the mapping of resources, requiring technology as a breakthrough in processing geothermal energy to take it directly from the reservoir because of its unorthodox classification based on its source as well the cost and benefit impact on the economy related to consumer mapping to detect early the market changes of energy to geothermal.Read more

The article presents a case study on the Investigation of lateral vibrations in the turbine-generator unit 5 of the Inga 2 hydroelectric power plant in the Democratic Republic of the Congo. Lateral vibrations were experimentally determined using twelve proximity and eddy-current probes, positioned on each measurement plane. The results were analyzed using the Dasylab and R software. Hence, it was observed that the vibration amplitudes of the upper guide bearing, lower guide bearing, and pivot/rotor exceeded acceptable or critical limit values o...f the international vibration standard for a rotating speed between 100-250 rpm. These excesses can lead to rotor mass imbalances, the eccentricity of the rotor axis relative to the rotation axis of the shaft, and the deformation of the coupling shaft between the upper rotor shaft and the turbine rotor shaft. Subsequently, the means and the variances of the vibration amplitudes were evaluated and compared to the reference values of the international standard. The results of the compliance analysis revealed statistically significant differences between the measured amplitudes and the reference values. Thus, it indicates deviations from international specifications.Read more

Reconstruction of pulverized coal boilers BKZ (Barnaul Boiler Plant, steam productivity 160 t/h, pressure 100 kgf/cm2, fuel: natural gas/fuel oil) with steam productivity of 160 t/h, converted to gas combustion, and an increased load capacity to 210 t/h, has been carried out. As part of the boiler modernization, a chemical water treatment system was reconstructed, significantly improving the quality of feedwater: hardness not exceeding 0.3-0.5 µeq/kg; SiO2 not exceeding 18 µg/kg, and electrical conductivity Х=0.6-1.0 µS/cm. T...he previously used phosphate regime for boiler water was replaced with a chelant-based regimen using trilon B. During operation, widespread damage to the screen tubes occurred. Circulation tests were conducted on one of the boilers, and an analysis of internal deposits was performed.It was determined that water circulation in the side screen is stable, and its velocities correspond to calculated values. The main cause of metal ruptures in the screen tube is metal corrosion, as well as local overheating of the wall caused by the formation of a steam layer due to the detachment of internal deposits.Read more

Sri Lanka is facing an energy crisis due to insufficient exploitation of renewable energy resources and high reliance on imported fossil fuels. Building-integrated PV (BIPV) systems are one approach that provides various benefits in countries with limited land areas and congested metropolitan regions for ensuring energy security. This study was conducted to evaluate the rooftop solar PV capacity and yearly electricity generation potential in selected provinces in Sri Lanka. The study found 115 km2 of rooftop area for solar PV installation in fo...ur Sri Lankan provinces; Sabaragamuwa, Western, Northern, and North Central with approximately 25 GW of solar PV installation capacity could lead to annual electricity generation of 45 TWh which could reduce carbon emissions by 20 million tCO2 per year.Read more

The purpose of this article is to propose a model of an electric-fired brick oven, with the aim of eliminating the imperfections presented by traditional brick ovens. To complete this study, we used the concepts of heat transfer, and material resistance, as well as those of computer-aided mechanical design.Deemed satisfactory, the results found give a yield of 94.5% and a cooking time of 7.29 hours based on 2000 bricks cooked.

The article examines the priorities and prospects of the road map for the development of renewable energy using the example of Turkmenistan. The main scientific conditions of the goal, objectives, principles of public policy, a heterogeneous class of renewable technologies, the main scientific conditions of the road map for sustainable development, the environmental aspect of climate change, mitigation potential, and costs are presented. The compiled roadmap for the use of renewable energy sources outlines the expected energy, economic, and env...ironmental effects from the use of renewable energy technologies in remote areas from the centralized power line. The author believes that the outlined development roadmap for the use of renewable energy sources will become the basis for drawing up programs in other countries, depending on natural, climatic, and geographical conditions. Thus, the road map for the development of renewable energy sources, the use of local renewable energy resources, can reduce the need for fossil fuels in some cases by up to 80% and will significantly reduce the anthropogenic load on the environment. The introduction of renewable energy sources is one of the most relevant and promising for the development of the desert and the fight against desertification in the Karakum.Read more

The article obtained systematized, scientifically substantiated gross, technical, economic, and environmental energy resource potentials from the introduction and use of solar energy technologies. The technical, economic, and environmental priorities of power plants were assessed in terms of energy efficiency, fuel economy, and the environmental impact per square meter from conversion to thermal and electrical energy in the city of Arkadag.The calculated results are, kWh/m2 per year: gross resource potential of solar energy - 1844.6; the techni...cal potential for conversion into thermal and electrical energy is equal to - 1256.44 and 242.44; economic - 502.6 and 96.98 kg fuel equivalent/m2 per year; environmental reduction in emissions of various harmful substances into the environment when using solar photovoltaic modules in the city of Arkadag will be: with annual electricity generation per m2 - 242.44 kW⋅h, annual fuel consumption savings - 96.96 kg. e., the reduction in emissions will be, kg per year: SO2 – 2.0; NOx – 1.1; CO – 0.14; CH4 – 0.29; CO2 – 155.0; solids – 0.21; when converted into thermal energy per m2 and annual production of 1256.4 kW⋅h, annual fuel savings are 502.6 kg of fuel equivalent; emission reduction will be, kg per year: SO2 – 10.4; NOx – 5.6; CO – 0.73; CH4 – 1.53; CO2 – 803.5; solids – 1.1.Empirical equations (1-5) have been obtained taking into account the gross, technical, economic, and environmental resource potentials of solar energy in the city of Arkadag, it is possible to carry out energy and environmental forecasting when drawing up a feasibility study.Read more